Adjustment of the Bunk Restraint

P4 DM Ch10; CasGen5 DM Ch7

Warning: Keep the upper bunk folded up and locked, and do not use the sleeper compartment while the vehicle is in motion unless a bunk restraint is installed and used. Not using the bunk restraint increases the chance of injury, or the degree of injury, to all occupants of the vehicle from accidents or sudden stops.

  1. Make sure the belt is attached to the bunk support and sleeper wall.
  2. To lengthen the belt, tip the link end downward and pull the link until it connects with the buckle.
  3. After the belt is connected, shorten it by pulling on the loose end until the belt is snug, but comfortable. Be sure the belts are not twisted. See Fig. .

    • Pull on the loose end to shorten the belt.

    1. Buckle

    2. Belt Release Button

    3. Link

    Fig. 1, Bunk Restraint Adjustment

Note:
Parent topic: Sleeper Compartment Restraints
Document Number: 0000117223
Manual Publication Date: 2024-05-03
Topic Publication Date: 2025-01-13