Side Guard Assist Activation Conditions
SGA and, if equipped, ASGA are active when the ignition is turned on. An SGA initializing telltale, the first telltale in Table. may appear on the driver display during startup.
Table 1, Side Guard Assist (SGA) Lamps
Table 1, Side Guard Assist (SGA) Lamps
After startup, if a trailer is not attached to the truck, a grey triangle appears on the driver display screen as shown in Fig. and Fig.. If a trailer is attached, a grey triangle with trailer appears.
If SGA monitoring experiences an error or is deactivated without a trailer attached, a grey triangle with a slash appears.
If SGA monitoring is deactivated with a trailer attached, a triangle with a trailer and a slash appears.
Note: In a left-hand drive truck, the SGA activation state (grey) telltale appears to the left of center on the driver display driving assistance screen; the amber (not shown) and red warning telltales appear to right of center.
-
Location of SGA Activation State (Grey) Telltale
-
Location of SGA Warning Telltales
Fig. 1, SGA Telltale Locations - ICUC
Note: In a left-hand drive truck with an ICC5 display, the SGA activation state (grey) telltale (not shown) appears to the right of center on the driver display driving assistance screen; it is replaced by the red warning telltale in the case of a possible imminent collision. The red warning telltale is accompanied by a pulsing red light animation. The amber caution telltale appears to the left of center.
This figure exists to solely to illustrate the SGA telltale locations on the driver display; these telltales will not appear at the same time.
-
Location of SGA Amber Caution Telltale
-
Location of SGA Activation and Warning Telltales