Sears Atlas Seat

P4 DM Ch10; CasGen5 DM Ch7

For seat adjustment controls, see Fig. .

  1. Isolator Lever

  2. Fore/Aft Seat Slide Lever

  3. Bottom Cushion Tilt Handle

  4. Seat Extension Lever

  5. Backrest Tilt Lever

  6. Lumbar Support Switches

  7. Suspension Inflation/Deflation Switch

Fig. 1, Sears Atlas Seat

  1. Isolator: Position the handle to the left to allow isolation movement. Position the handle to the right to lock-out isolation movement.
  2. Fore/Aft Seat Slide: To adjust the fore-and-aft position of the entire seat, squeeze the fore/aft slide lock against the adjustment bail, and lift the bail up. See Fig. . Slide the seat forward or backward to the desired position. Release the bail and fore/aft slide lock, to its original position, to lock the seat in place.

    • Squeeze the fore-and-aft slide lock against the adjustment bail.

    • Lift up the adjustment bail.

    Fig. 2, Fore/Aft Slide Adjustment, Sears Atlas Seat

  3. Bottom Cushion Tilt: Lift the handle upward and move the seat cushion to the desired position. Three positions are available.
  4. Seat Extension: Rotate the handle upward to disengage, then move the seat cushion to the desired position and release the lever. Three positions are available.
  5. Backrest Tilt: Pull upward on the recliner handle, move the backrest to the desired position and release the handle.
  6. Lumbar Support: Rear rocker switch: Push forward to inflate the lower lumbar bag; push rearward to deflate the bag. Center rocker switch: Push forward to inflate the upper lumbar bag; push rearward to deflate the bag.
  7. Suspension Inflation/Deflation: Push forward on the gray rocker switch to inflate and raise the suspension; push rearward to deflate and lower the suspension.

    Armrest Angle: Rotate the control knob, located on the underside of the armrest, to set the desired angle of the armrest.

Note:
Parent topic: Seats
Document Number: 0000117178
Manual Publication Date: 2024-05-03
Topic Publication Date: 2025-01-13