Dana Spicer Axles

sd mm 33.01.002

Park the vehicle on a level surface, apply the parking brakes, and chock the tires. When lubricating upper and lower knuckle assemblies, do not raise the front axle. Wipe the fittings clean, then apply multipurpose chassis grease, NLGI Grade 1 (6% 12-hydroxy lithium stearate grease) or NLGI Grade 2 (8% 12-hydroxy lithium stearate grease), until new grease is seen at the junctions of the axle beam and knuckles. See Fig.. Knuckle pins without grease fittings are permanently lubricated.

  • Grease exits

  1. Grease Fitting

Fig. 1, Dana Spicer Knuckle Pin Lubrication

Note:
Parent topic: Knuckle Pin Lubrication
Document Number: 0000120029
Manual Publication Date: 2024-05-23
Topic Publication Date: 2024-10-30