WABCO Maxxus Calipers

sd mm 42.05.006
  1. Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires.
  2. Raise the vehicle and support it on jack stands.
  3. Remove all of the wheel assemblies. For instructions, see  of the 108SD and 114SD Workshop Manual.
  4. Set a torque wrench to 273 lbf·ft (370 N·m) and tighten the caliper mounting bolts following the tightening pattern shown in Fig.. If they do not turn, no further work is needed. If they turn, take the vehicle to an authorized Freightliner dealer to have all of the caliper bolts on that wheel end replaced.

    Note: Tighten the fasteners in the order indicated.

    • Left Hand, Bottom View

    • Right Hand, Bottom View

    Fig. 1, Wabco Maxxus Radial Mounted Caliper Tightening Pattern

  5. Install the wheel assemblies. For instructions, see of the 108SD and 114SD Workshop Manual.
  6. Remove the jack stands and lower the vehicle.
Note:
Document Number: 0000120442
Manual Publication Date: 2024-05-23
Topic Publication Date: 2024-10-30