Lubrication of the Drag Link

sd mm 46.05.001
  1. Using a clean rag, wipe all dirt from both drag link grease fittings; see Fig..
  2. Using a grease gun, apply clean grease at the grease fittings until old grease is forced out of the socket. Use multipurpose chassis grease NLGI Grade 2 (8% 12-hydroxy lithium stearate grease) or NLGI Grade 1 (6% 12-hydroxy lithium stearate grease). Grade 2 is preferred.

    1. Grease Fitting at Pitman Arm

    2. Grease Fitting at Axle Steering Arm

    Fig. 1, Drag Link

Note:
Parent topic: Steering
Document Number: 0000120426
Manual Publication Date: 2024-05-23
Topic Publication Date: 2024-11-06