Oil Drain Intervals for EPA07 Heavy Duty On-Highway Engines
The oil drain intervals for the Series 60 and MBE 4000 On-Highway engines listed in the table below are based on engines operating with Ultra-Low Sulfur Diesel (ULSD) fuel (below 15 ppm) meeting the properties listed in “Diesel Fuel Properties” table with a Detroit Fluids Specification DFS 93K222 and DFS 93K218 approved oil. API CK-4 and CJ-4 certified oil that is not Detroit Fluids Specification approved may be used at reduced drain intervals. These intervals should be considered as maximum and should not be exceeded.
| Maximum Oil Drain and Filter Change for Series 60, MBE 4000 using Detroit Fluids Specification DFS 93K222 and DFS 93K218 Approved Oils with ULSD Fuel | |||
|---|---|---|---|
| Service Application | Long Haul * | Short Haul † | Severe ‡ |
| Engine Series | |||
| Series 60, EPA07 | 30,000 miles (48,000 km) | 20,000 (32,000 km) 500 h, or 6 mon§ | 15,000 miles (24,000 km) 300 h, or 3 mon§ |
| MBE 4000, EPA07 | 30,000 miles (48,000 km) | 15,000 miles (24,000 km), 500 h, or 6 mon§ | 10,000 miles (16,000 km) 300 h, or 3 mon§ |
| * Long Haul (over-the-road transport) service applies to vehicles that annually travel more than 60,000 miles (96,000 kilometers) and average greater than 6 miles per gallon with minimal city stop-and-go operation. | |||
| † Short Haul service applies to vehicles that annually travel up to 30,000-60,000 miles (48,000-96,000 kilometers) and average between 5.1 and 5.9 miles per gallon. | |||
| ‡ Severe service applies to vehicles that annually travel up to 30,000 miles (48,000 kilometers) or average less than 5 miles per gallon or that operate under severe conditions. Severe service also applies to RV applications. Only one of these conditions needs be met to categorize an application as Severe Service. | |||
| § Whichever comes first. | |||
Note: