Oil Drain Intervals for Specific Regions Outside of US or Canada
The oil drain intervals for the engines listed in the tables below are based on engines operating in specific regions with or without Ultra-Low Sulfur Diesel (ULSD) fuel (below 15 ppm) with a Detroit Fluids Specification DFS 93K222, DFS 93K218 and DFS 93K214 approved oil. API CK-4/CJ-4/CI-4 PLUS or equivalent certified oil that is not Detroit Fluids Specification approved may be used at reduced drain intervals. These intervals should be considered as maximum and should not be exceeded.
| Maximum Oil Drain and Filter Change Intervals for Detroit Fluids Specification DFS 93K222 and DFS 93K218 Approved Oils for Specific Regions Outside Of US, Canada and Australia using Ultra-Low Sulfur Diesel (ULSD) fuel (below 15 ppm) | ||||
|---|---|---|---|---|
| EPA07/EPA10/GHG14/GHG17 Using DFS 93K222(CK-4) or DFS 93K218(CJ-4) Approved Oils | ||||
|
Service Application > |
Efficient Long Haul |
Long Haul** (> 6.0 mpg) (> 2.55 km / liter) |
Short Haul† (5.1 to 5.9 mpg) ( 2.13 to 2.55 km / liter) |
Severe‡ (< 5.0 mpg) (< 2.13 km / liter) |
|
Engine Series |
||||
| DD13 / DD15 / DD16 | Not Applicable | 50,000 miles (80,000 km) or 1280 hours* | 35,000 miles (56,000 km) or 895 hours or 1 year* | 25,000 miles (40,000 km) or 640 hours or 6 months* |
|
**Long Haul (over-the-road transport) service applies to vehicles that annually travel more than 60,000 miles (96,000 kilometers) and average greater than 6.0 miles per gallon with minimal city stop-and-go operation. |
||||
| †Short Haul service applies to vehicles that annually travel up to 30,000-60,000 miles (48,000-96,000 kilometers) and average between 5.1 and 5.9 miles per gallon. | ||||
| ‡Severe applies to vehicles that annually travel up to 30,000 miles (48,000 kilometers) or average less than 5 miles per gallon or that operate under severe conditions. Severe service also applies to RV applications. Only one of these conditions needs to be met to categorize an application as Severe Service. | ||||
| * Whichever comes first. | ||||
| Maximum Oil Drain and Filter Change Intervals for Detroit Fluids Specification DFS 93K222, DFS 93K218 and DFS 93K214 Approved Oils for Specific Regions Outside Of US, Canada and Australia using Low Sulfur Diesel (LSD) fuel (500 ppm maximum) | |||
|---|---|---|---|
| EuroIV Using DFS 93K222(CK-4) or DFS 93K218(CJ-4) or DFS 93K214(CI-4 PLUS) Approved Oils | |||
| Engine Series / Region | Oil Drain Interval | ||
| DD13, DD15, DD16 (Outside of US, Canada and Australia) including Central and South America and Mexico | 40000 km | ||
| Australia Maximum Oil Drain and Filter Change Intervals for Detroit Fluids Specification DFS93K222 and DFS 93K218 Approved Oils using Ultra-Low Sulfur Diesel (ULSD) fuel (below 15 ppm) | |||
|---|---|---|---|
| Australia Oil Drain Intervals for DD13 and DD15 Engines EPA07 | |||
| Oil Type | < 1.2 km/L | 1.2 to 1.8 km/L | > 1.8 km/L |
| DFS 93K218 (CJ-4) |
25,000 km or (500 hours)* |
30,000 km or (575 hours)* |
40,000 km or (640 hours)* |
| DFS 93K222 (CK-4) |
30,000 km or (575 hours)* |
40,000 km or (640 hours)* |
60,000 km or (750 hours)* |
|
- Fuel Economy represents overall fuel economy (including idle time) * Whichever comes first. |
|||
| Australia Maximum Oil Drain and Filter Change Intervals for Detroit Fluids Specification DFS93K222 and MB 228.51 or MB 228.31 Approved Oils using Ultra-Low Sulfur Diesel (ULSD) fuel (below 15 ppm) | ||||
|---|---|---|---|---|
| Australia Oil Drain Intervals for DD13 and DD16 Engines GHG17 | ||||
| Australia Decoder |
Single Trailer < 42 Tons DD13 |
B/Double Lite < 62.5 Tons DD13/DD16 |
B/Double Heavy 62.5 to 90 Tons DD16 |
Road Train Multi Trailer 90 Tons and Greater DD16 |
| Bins | Greater than 2.0 km/L | Less than 2.0 km/L | 1.6 to 1.8 km/L | Less than 1.6 km/L |
| Intervals |
30,000 kms (480 hrs )* |
80,000 kms (1,280 hrs )* |
60,000 kms (960 hrs )* |
50,000 kms (800 hrs )* |
|
- Fuel Economy represents overall fuel economy (including idle time) * Whichever comes first. |
||||