Seat Belt Inspection

c2 dm 03.04.002
Warning: Inspect and maintain seat belts and tethers as instructed below. Seat belts and tethers that were damaged or stressed in an accident must be replaced, and their anchoring points must be checked. When any part of a seat belt system needs replacement, the entire seat belt must be replaced, both the retractor and the buckle side. Do not attempt to modify the seat belt system; doing so could change the effectiveness of the system. Failure to replace damaged or stressed seat belts or any modifications to the system may result in personal injury or death.

Inspect the seat belts and tether belts (if so equipped).

  1. Check the web for fraying, cuts, or extreme wear, especially near the buckle latch plate and in the D-loop guide area.
  2. Check the web for extreme dirt or dust, and for severe fading from exposure to sunlight.
  3. Check the buckle and latch for operation and for wear or damage.
  4. Check the Komfort Latch for function and cracks or other damage.
  5. Check the web retractor for function and damage.
  6. Check the mounting bolts for tightness and tighten any that are loose.
Note:
Parent topic: Seat Belts and Tether Belts
Document Number: 0000106855
Manual Publication Date: 2025-12-10
Topic Publication Date: 2025-12-09