General Information
The following information provides steps to perform an air brake test for vehicles equipped with the Bendix Intellipark park brake system. The park brake switch has two light emitting diodes (LEDs). See Fig.. Both LEDs illuminate when the parking brake is set; the LEDs are extinguished when the parking brake is released.
For electric powered vehicles, turn the ignition key to the ON position. This keeps the high-voltage system from operating. To start the high-voltage system, turn the ignition key to the start position and release.
Important: Before performing any of the following tests, chock the tires to prevent the vehicle from moving.
-
Light Emitting Diode