Fluid and Lubricant Specifications
Table 1, Fluid and Lubricant Specifications
|
Fluid and Lubricant Specifications |
|
|
Component |
Recommended Fluid or Lubricant |
|
Front Axle Spindle Pins, Tie Rods, Drag Link, Intermediate Steering Shaft, Front Brake and Pedal Shafts, Slip Spline and Universal Joints |
Multipurpose Grease Lithium 12- Hydroxy Stearate NLGI No. 2; for temperatures below 0°F (–18°C), use MIL-G-10924B |
|
Hydraulic Brake Main Cylinder |
Heavy-Duty DOT 3 Brake Fluid |
|
Brake and Pedal Pivots |
Starplex 2 (lithium soap-based grease) |
|
Engine |
See Manufacturer's Recommendations* |
|
Transmission |
Mobil Delvac Synthetic ATF |
|
Fuel |
Ultralow-Sulfur Diesel Fuel HD5 Grade Propane Compressed Natural Gas (CNG) |
|
Disc Brake Caliper Rails |
FCCC No. 4JD623 Brake Caliper Slide Grease |
|
Rear Axle Differential |
See Manufacturer's Recommendations |
|
Hydraulic System Reservoir |
ATF must meet Dexron® III or TES-389 specifications |
|
Engine Coolant |
Refer to the coolant label on the vehicle or the engine manufacturer’s service literature for approved coolant. Coolant used must be compatible with the engine manufacturer’s coolant specifications.* 1 |
- * For Cummins engine service literature, refer to Cummins Online at . For Detroit™ service literature, refer to the Detroit Diesel link on the DTNA TechLit website .