Menu Navigation

c2 dm 05.01.007

The menu navigation screens are provided to illustrate the menu system. The paths to specific screens are shown, along with instructions for using the toggle buttons to move from one screen to another. See Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., and Fig..

Important:  Follow the steps below to change the three items (also known as favorites) shown in the message display center. The message display center is referred to as screen C in  .

Note: The driver can check the pressure of the propane in the fuel rail (pressure of the fuel in both the tank and pump booster), and make this one of the three items shown in the message display center. Select the item with the fuel pump and psi reading, then follow the directions below to make it one of the favorites.

  1. With the vehicle in park, turn the ignition to RUN, and allow the self test to complete.
  2. Press the down toggle button to select an item to change. The selected item will now be highlighted.
  3. Press the right toggle button once to enter the favorites display menu, shown in Fig., as screen D.
  4. Use the down toggle button to scroll through the available items.
  5. Highlight the new item, then press the right toggle button. The selected item will now appear in the message display center.
    1. Tachometer

    2. Dash Message Center

    3. Speedometer

    4. Fuel Level Gauge

    5. Primary Air Pressure Gauge

    6. Coolant Temperature Gauge

    7. Secondary Air Pressure Gauge

    8. Diesel Exhaust Fluid (DEF) Gauge

    9. Dash Driver Display Screen

    10. Toggle Button, Right

    11. Toggle Button, Down

    Fig. 1,  Gauge Layout (typical, U.S.), Diesel Engines

    1. Tachometer

    2. Dash Message Center

    3. Speedometer

    4. Fuel Level Gauge

    5. Primary Air Pressure Gauge

    6. Coolant Temperature Gauge

    7. Secondary Air Pressure Gauge

    8. Dash Driver Display Screen

    9. Toggle Button, Right

    10. Toggle Button, Down

    Fig. 2,  Gauge Layout (typical, U.S.), LPG Engines

    Fig. 3, Setup Menu Screens

    Fig. 4, Diagnostic Menu Screens, Screen 1

    Fig. 5, Diagnostic Menu Screens, Screen 2

    Fig. 6, Diagnostic Menu Screens, Screen 3

    Fig. 7, Ignition On, Normal Mode

    Fig. 8, Self Test

    Fig. 9, Display Messages

    Fig. 10, Auxiliary Screens

    Fig. 11, Maintenance Menu Screens, Screen 1

    Fig. 12, Maintenance Menu Screens, Screen 2

    Fig. 13, Trip Data

    Fig. 14, Warning Messages

    and

    Fig. 15, Ignition Off (shown when ignition is keyed OFF)

    Fig. 16, TPMS Main Menu Structure

    Status Monitor-Graphics Block 1 is selected. The temperature of tire 1, axle 1 is shown to the right.

    Fig. 17, TPMS Status Monitor Display Selection

    Fig. 18, TPMS Data Display (all axles and tires are shown)

    Note: With the exception of the temperature warning, the TPMS warning lamp icon appears in each graphic warning.

    1. Reception Lost or not Received Warning

    2. Over Pressure or Extreme Over Pressure Warning

    3. Air Leak Warning

    4. Under Pressure or Extreme Under Pressure Warning

    5. Over Temperature Warning (low air pressure icon activates)

    Fig. 19, TPMS Graphic Warnings (appear in the TPMS diagnostics menu and on the driver display screen)

    Warnings for a specific axle and tire combination can be reviewed in this menu.

    Fig. 20, TPMS Warning Menu Functionality

Note:
Document Number: 0000106941
Manual Publication Date: 2024-05-07
Topic Publication Date: 2024-05-06