Vehicle Identification Label Locations

ALL FTL/WST DMs; Vehicle Identification Chapter
Note: Labels shown in this chapter are examples only. Actual specifications may vary from vehicle to vehicle.

This vehicle is equipped with several labels in compliance with industry and local standards. Generally, labels are attached to the inside of the cab doors, on the B-pillars, on the sun visors, or attached to the outside of the ziplock document bag.

Below is a list of vehicle labels and their typical locations. This list is not exhaustive, and label location may differ depending on the vehicle.

  • Component Information Label

    The component information label is located on the underside of the driver's sun visor.

  • Component Gross Weight Rating (GWR) Label

    The component GWR label is located on the right-hand B-pillar. Vehicles domiciled in Mexico have a Spanish GWR label.

  • Federal Motor Safety Standard (FMVSS) Label

    The FMVSS label is attached to the left-hand B-pillar. It is applied on the interior edge for vehicles domiciled in the United States or manufactured for U.S./Canada operation.

    The FMVSS label is applied to the exterior edge of the B-pillar if paired with a Spanish weights and measurements label. Vehicles domiciled in Mexico are labeled with a Spanish weights and measurement label that lists suitable tire and rim combinations.

  • Canada Certification Label

    The Canada Certification Label (for a complete or incomplete vehicle) is located on the left-hand B-pillar, either on the exterior edge, or stand alone.

  • Mexico Certification Label

    Vehicles domiciled in Mexico have a Mexico certification label applied to the right-hand B-pillar.

  • Spanish Weights and Measures Label

    The Spanish Weights and Measures Label is located either on the interior or exterior edge of the left-hand B-pillar.

  • Aftertreatment System Indicators Label

    The Aftertreatment System Indicators Label is applied to the driver’s sun visor.

  • Vehicle Emissions Control Information Label

    The Vehicle Emission Control Information Label is located on the left-hand B-pillar.

  • Noise Emissions Control Labels

    The EPA Vehicle Noise Emissions Control Label is usually located inside the left-hand door.

    The NOM Vehicle Noise Emissions Control Label is usually located inside the left-hand door. For vehicles manufactured for dual Mexico/United States operation, both labels are applied. In this case, the NOM Vehicle Noise Emission Control Label is located in the primary location on the left-hand B-pillar and the EPA noise emission control label is applied to the left-hand door.

  • Certified Clean Idle Label (CARB)

    The CARB Certified Clean Idle Label is placed near the exterior bottom edge of the left-hand door.

  • Customer Assistance Label

    The Customer Assistance Label is located on the left-hand B-pillar.

Note: In Fig. , label locations are examples. Exact label locations vary from vehicle to vehicle. For example, vehicles that are right-hand drive might have left- and right-side labels on opposite sides.

  • Left-Hand B-Pillar

  • Left-Hand Door

  • Right-Hand B-Pillar

  1. Customer Assistance Label

  2. Noise Emissions Control Information Label or FMVSS Certification Label

  3. FMVSS Certification Label or Spanish Weights and Measurement Label (for vehicles domiciled in Mexico only)

  4. Canada Certification Label or FMVSS Certification Label (if applied)

  5. Entry/Exit Warning Decal

  6. NOM Vehicle Noise Emissions Control Label (if applied,for vehicles domiciled in Mexico only)

  7. EPA Vehicle Noise Emissions Control Label or Secondary Noise Emissions Control Label

  8. Mexico Certification Label (if applied, for vehicles domiciled in Mexico only)

  9. Component GWR Label

Fig. 1, Example Label Locations

Note:
Parent topic: Vehicle Identification
Document Number: 0000110084
Manual Publication Date: 2025-02-11
Topic Publication Date: 2026-10-08