Hazard Warning Flasher

m2 dm 04.03.005

The hazard warning light flasher (Fig.) is a red rocker switch located on the top of the multifunction switch module. When the flashers are activated, all of the turn signal lights (front, side, and rear) and the two green indicator arrows on the control panel will blink on and off.

Note: Press down on the upper part of the rocker to activate the hazard warning flashers.

  1. Washer Button

  2. Wiper Control Dial

  3. Turn Signal Lever

  4. Hazard Flasher (red rocker switch)

  5. Multifunction Switch Module

Fig. 1, Multifunction Turn Signal Switch

To flash the hazard warning lights, press down on the upper part of the rocker (towards the dash). To stop the hazard warning lights, press down on the lower part of the rocker (towards the steering wheel).

Note:
Parent topic: Multifunction Turn Signal Switch
Document Number: 0000117480
Manual Publication Date: 2025-02-11
Topic Publication Date: 2024-05-09