Starting

m2 dm 15.02.002
  1. Set the parking brake.
  2. Place the key in the ignition, and turn it clockwise to the ON position to initiate power to the hybrid system.
    Wait for the gauges on the instrument panel to complete two sweeps (one from left to right, and one from right to left) and return to their normal ranges.
  3. Ensure the transmission is in neutral. The gear display should display a solid "N".

    4. Warning: Never start the engine unless the transmission is in neutral and the brake is applied. Accidental movement of the vehicle could result in property damage, personal injury, or death.

  4. Turn the key clockwise to the START position. The engine will crank after a brief delay. As soon as the engine starts, release the key, allowing it to return to the ON position. The engine will continue to run with the key in the ON position.
  5. Apply the service brake, then release the parking brake.
  6. With the service brake applied, press the desired mode on the shift control to put the vehicle into gear.
  7. Slowly release the service brake.

    Note: The vehicle may be powered by the electric motor or the diesel engine, depending on battery charge and the demand for driveline torque. If the electric motor alone is powering the driveline, the diesel engine will stay at idle.

Note:
Parent topic: Starting, and Engine Shutdown (HEV)
Document Number: 0000117776
Manual Publication Date: 2025-02-11
Topic Publication Date: 2024-05-09