General Information
Refer to the Eaton website for additional information, www.roadranger.com .
Important: Before starting the vehicle, always do the following:
-
Be seated in the driver's seat.
-
Place the transmission in neutral.
-
Set the parking brakes.
-
Press the clutch pedal (if equipped) down to the floor.
The AutoShift ASW is an automated 6-speed Eaton Fuller transmission. No clutch is necessary to operate the vehicle.
The AutoShift AS2 is a partially automated 10-speed Eaton Fuller transmission. The driver must use the clutch and put the transmission in neutral to start and stop the vehicle. A push-button shift selector (see Fig. )is used with AutoShift AS2 and ASW transmissions.
-
Not Used
-
R (reverse)
-
N (neutral)
-
D (drive)
-
MANUAL Mode
-
Low Gear Hold
-
Upshift/Downshift Arrows
-
SERVICE Light
-
Mode Indicator
-
Mode Button
Fig. 1, Eaton Push-Button Shift Selector
Important: If you have to leave the cab with the engine running:
-
Place the transmission in neutral.
-
Set the parking brakes.
-
Chock the tires.