Overhead Console Dome/Reading Lights

m2 dm 04.02.006

To replace the overhead console dome/reading lights (Fig.), do the following steps:

  1. Overhead Console

  2. Trimplate

  3. Light Assembly

Fig. 1, Overhead Console Dome Lights

  1. Remove the tapping screws that attach the lamp assembly and trimplate to the overhead console.
  2. Separate the lamp assembly from the trimplate and disconnect the wiring harness.
  3. Replace the lamp assembly.
  4. Snap the lamp assembly and trimplate together.
  5. Connect the lamp assembly to the wiring harness.
  6. Insert the tabs on the trimplate into the slots on the overhead console attachment plate.
  7. Center the lamp assembly in the headliner cutout and install the center tapping screw.
  8. Install the remaining tapping screws.
Note:
Parent topic: Light Replacement
Document Number: 0000117457
Manual Publication Date: 2025-02-11
Topic Publication Date: 2024-05-09