Cab Door Locks and Handles

One key operates the ignition switch and all of the door locks.

To unlock the driver's door from outside the cab, insert the key in the lockset and turn it one-quarter turn clockwise (Fig.). To remove the key, turn it counterclockwise to its original position. Pull out on the door pull handle to open the door.

Key

Lock

Door Pull Handle

Fig. 1, Exterior Door Handle

To unlock the passenger's door from outside the cab, insert the key in the lockset and turn it one-quarter turn counterclockwise. Turn the key clockwise to the original position to remove it.

To lock a door from outside the cab, do either one of the following:

• Insert the key in the lockset and turn it in the direction opposite to the unlocking direction (counterclockwise for the driver's door, clockwise for the passenger's door). Close the door if it is open.

• Push down the inside lock button (Fig.). Close the door.

Note: To open the door from the inside, lift up on the door lever (arrow).

Lock Button

Armrest/Handle

Door Lever

Window Crank

Inner Door Grab Handle (optional)

Fig. 2, Door Interior

To open the door from the inside, lift up on the door lever. This will unlatch the door whether or not it is locked. If it is open, close the door by pulling the inner door grab handle.

To lock either door from inside the cab, slide the lock button downwards (). To unlock the door without unlatching it, push the lock button upwards. A red dot will show below the lock button when it is unlocked.

Note: Move the button down to lock, and up to unlock (arrows). The door is unlocked when the red dot shows.

Door

Lock Button

Red Dot

Fig. 3, Door Lock Button