Downshifting

m2 dm 08.06.005
  1. While in high range, move the gear shift lever from 8th gear through 5th gear as conditions require, always double-clutching between gears.
  2. When in 5th gear and ready for the next downshift, push down the range preselection lever and move the shift lever to the 4th gear position, being sure to double-clutch. As the shift lever passes through neutral, the auxiliary section will automatically shift from high to low range.
  3. While in the low range, continue downshifting from 4th through LO as conditions require, always double-clutching between gears.
  4. Do not downshift into LO-LO from LO unless operating conditions make it necessary. If it is necessary, make sure that the shift lever is in the LO gear position and the auxiliary section is in the low range. Then, move the DEEP REDUCTION lever on the dashboard to the IN position. Immediately release the accelerator, depress the clutch pedal once to break torque, engage the clutch, and accelerate. The auxiliary section will automatically shift from LO to LO-LO when the gears reach the same speed.

    Notice: Never use the clutch brake when downshifting, or as a brake to slow the vehicle. This will cause premature clutch brake wear.
    Note:
    Parent topic: Operation, Deep-Reduction Models
    Document Number: 0000117792
    Manual Publication Date: 2025-02-11
    Topic Publication Date: 2024-05-09