Headlight High Beams
Push the turn signal lever forward, towards the windshield, to turn on the high-beam headlights. Pull the turn signal lever back to its original position to turn them off. See Fig..
Note: Move the lever away from you to turn on the high beams. Move the lever back to its original position to turn them off.
Move the lever towards you to flash the high beams momentarily.
-
Turn Signal Lever
-
Boot
Fig. 1, Headlight High Beams
When the high beam headlights are on, a blue light illuminates on the instrument cluster between the tachometer and speedometer. For vehicles built to operate in the United States, switching on the high beams will switch off the road lights.
Note: The ignition switch must be on for the high beams to work.
With the headlight low beams on, pull the lever backward, towards the steering wheel, to flash the high beams (turn them on momentarily).
The headlight low beams remain on continuously during high beam operation. If the low beam headlights are turned off by use of the headlight switch, the high beams turn off also.