Windshield Wiper/Washer Controls
Notice: Do not attempt to manually move the windshield wiper arms. Wiper motor damage will occur if the arms are forcibly moved.
The wipers are operated by a dual paddle switch located on the auxiliary instrument panel. See Fig.. To turn the wipers on or off, press the top paddle in. When the top paddle is pushed up, the wipers will operate at high speed; when it is pushed down, they will wipe at low speed.
Fig. 1, Windshield Wiper Switch
The bottom paddle, when pushed in, turns the washers on. When pressed for less than ½-second, the wipers will perform a single, low speed dry wipe (mist function). When pressed for more than ½-second, the wash cycle begins and continues for three cycles or until the paddle is released. When the bottom paddle is pushed up, the wipers operate in fast delay. When the bottom paddle is pushed down, the wipers operate in slow delay. With the wipers in delay mode (fast or slow), push the bottom paddle up to shorten the delay period, or push the paddle down to lengthen it.