Fob Battery Replacement

cen dm 03.13.004
  1. Open the battery cover on the back of the fob with a suitable coin or other thin piece of metal. Twist off the cover. See Fig..

    1. Fob

    2. Battery

    3. O-Ring

    4. Battery Cover

    Fig. 1, Fob Battery

  2. Remove the battery and the O-ring installed inside the cover. Save the O-ring for later installation.

    3. Important: The battery may contain perchlorate material; special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate.

  3. Install the new battery, as follows.
    1. Insert the new battery into the fob. Make sure the battery is right side up.
    2. Install the O-ring as removed. If the O-ring is damaged, or there are signs of moisture inside the fob, replace the O-ring.
    3. Twist on the battery cover and check it to make sure it is tight.
  4. Check the fob for correct operation.
Note:
Parent topic: Keyless Security System, Optional
Document Number: 0000118666
Manual Publication Date: 2024-05-13
Topic Publication Date: 2025-04-05