Bunk Restraint Operation
cen dm 05.02.003
- Starting at the foot of the bunk, pull up the link end
of the belt far enough to engage the buckle. See Fig..
-
Mattress
-
Sleeper Wall
-
Restraint
-
Belt Anchor
-
Buckle
Fig. 1, Bunk Restraint
-
- Fasten the belt by pushing the link end into the buckle until they latch. Make sure that the belt is not twisted. Check the engagement by trying to pull the link out of the buckle. If they come apart, repeat this step. If the problem continues, replace the belt. Repeat steps 1 and 2 for the other two belts located in the middle and upper portion of the bunk to lock the restraint in place.
- To release the bunk restraint, push the release button
on the buckle at the head of the bunk and pull the link from the buckle.Repeat this step for the other two buckles to completely release the bunk restraint.
Note: