Bunk Restraint Adjustment
cen dm 05.02.002
- Make sure the belt is attached to the bunk support and sleeper wall.
- To lengthen the belt, tip the link end downward and pull the link until it connects with the buckle.
- After the belt is connected, shorten it by pulling on the
loose end until the belt is snug, but comfortable. Be sure the belts
are not twisted. See Fig..
-
Pull on the loose end to shorten the belt.
-
Buckle
-
Belt Release Button
-
Link
Fig. 1, Bunk Restraint Adjustment
-
Note: