Reverse

cen dm 08.13.007
  1. Press the system switch on the shift handle so that it is in the ON position and the ESS system is activated.
  2. Push the clutch pedal to the bottom of its travel so that the clutch brake stops the transmission input shaft from rotating.
  3. Move the shift lever and engage reverse.
  4. Slowly release the clutch pedal and move the vehicle in the reverse direction.

    5. Note: If a HI reverse range is required, follow the steps below.

  5. Press the system switch on the shift handle so that it is in the OFF position and the ESS system is deactivated.
  6. Press the top portion of the shift-intent switch to engage the HI range.
  7. Push the clutch pedal to the bottom of its travel so that the clutch brake stops the transmission input shaft from rotating.
  8. Move the shift lever and engage reverse.
  9. Slowly release the clutch pedal and move the vehicle in the reverse direction.
    See Fig. for two ESS 9-speed shift patterns and one ESS 10-speed shift pattern.

    • 9-Speed Shift Pattern with LO Gear

    • 9-Speed Shift Pattern

    • 10-Speed Shift Pattern

    Fig. 1, Meritor ESS 9- and 10-Speed Shift Patterns

Note:
Parent topic: Operation, ESS
Document Number: 0000118821
Manual Publication Date: 2024-05-13
Topic Publication Date: 2024-06-06