Canada Certification Label
Complete tractors with fifth wheels manufactured for Canada are marked with a Canada certification label attached to the left-hand B-pillar.
Complete tractors with fifth wheels manufactured for dual Canada/United States operations will have both a FMVSS certification label and Canada certification label. In this case the FMVSS certification label will be applied on the interior edge of the B-pillar and the Canada certification label will be applied on the exterior edge as show in Fig..
-
Left-Hand B-Pillar
-
Left-Hand Door
-
Right-Hand B-Pillar
-
Primary Noise Emission Control Label (Mexico or United States)
-
Customer Assistance Label (United States or Mexico)
-
FMVSS Certification Label or Spanish Weights and Measurement Label
-
Canada Certification Label or FMVSS Certification Label
-
Entry/Exit Warning Decal
-
Vehicle Emission Control Information Label
-
Secondary Noise Emission Control Label (English)
-
Mexico Certification Label
-
Component GWR Label (Spanish or English)
Fig. 1, Label Locations
See Fig. for an example of a Canada certification label.
Fig. 2, Canada Certification Label
Trucks built without a cargo body and tractors built without a fifth wheel that are intended for service in Canada will have an incomplete Canada vehicle certification label attached to the left-hand B-pillar. After completion of the vehicle, a complete Canada certification label must be attached by the final-stage manufacturer to certify that the vehicle conforms to all applicable vehicle safety regulations in effect on the date of completion.