Mode/Reset Switch

s2 dm 03.01.000

The mode/reset switch, shown in Fig., is located on the right side of the instrument cluster. The mode/reset switch is used to scroll through the displays on the message display screen, and to reset the trip distance and trip hours values to zero.

Fig. 1, Mode/Reset Switch

When the odometer reading is displayed and the parking brake is applied:

  • Press the mode/reset switch once and the trip distance will display.

  • Press the mode/reset switch a second time and the trip hours (engine hours) will display.

  • Press the mode/reset switch a third time and the SELECT screen and the current units, MI or KM, will display.

  • Press the mode/reset switch a fourth time to return to the odometer reading.

To reset trip miles and/or trip hours to zero, press the mode/reset switch for 1 second or longer. To toggle between MI (miles) or KM (kilometers), press the mode/reset switch while in the SELECT screen.

Note:
Parent topic: Instrumentation Control Unit
Document Number: 0000119117
Manual Publication Date: 2024-05-17
Topic Publication Date: 2024-05-13