Headlight/Parking Light Switch
The headlights and parking lights are operated with a paddle switch, shown in Fig.. When the paddle is lowered, the parking lights (front turn signals, marker and identification lights, and the taillights) illuminate. When the paddle is raised, the low-beam headlights illuminate, along with all of the parking lights. To turn off all lights, return the paddle to the center position.
Note: Raise the paddle to illuminate the low-beam headlights.
Lower the paddle to illuminate the parking lights.
Fig. 1, Headlight/Parking Light Switch
Note: The front turn signal is the amber lens in each headlight unit. The low-beam headlight is the top clear lens in each headlight unit.
When the headlights or parking lights are on, the panel lights also illuminate. A light in the switch backlights either the top icon (for headlights and parking lights) or the bottom icon (for parking lights only).
Daytime Running Lights
Turning on the ignition and releasing the parking brakes automatically activates the daytime running lights, if so equipped. The daytime running lights will operate until the parking brakes are applied or the headlights are turned on.
The daytime running lights illuminate at about two-thirds of normal power.