Menu Navigation

s2 dm 19.10.000

The menu navigation screens are provided to illustrate the menu system. The paths to specific screens are shown, along with instructions for using the toggle buttons to move from one screen to another. See Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., Fig., and Fig..

Important: Follow the steps below to change the three items (also known as favorites) shown in the message display center. The message display center is referred to as screen C in Fig..

Note: The driver can check the pressure of the propane in the fuel rail (pressure of the fuel in both the tank and pump booster), and make this one of the three items shown in the message display center. Select the item with the fuel pump and psi reading, then follow the directions below to make it one of the favorites.

With the vehicle in park, turn the ignition to RUN, and allow the self test to complete.
press the down toggle button to select an item to change. The selected item will now be highlighted.
press the right toggle button once to enter the favorites display menu, shown in Fig., as screen D.
Use the down toggle button to scroll through the available items.
Highlight the new item, then press the right toggle button. The selected item will now appear in the message display center.
Fig. 1, Gauge Layout (typical, U.S.), LpG Engines
Fig. 2, Setup Menu Screens

Fig. 3, Diagnostic Menu Screens, Screen 1

Fig. 4, Diagnostic Menu Screens, Screen 2

Fig. 5, Diagnostic Menu Screens, Screen 3

Fig. 6, Ignition On, Normal Mode

Fig. 7, Self Test

Fig. 8, Display Messages

Fig. 9, Auxiliary Screens

Fig. 10, Maintenance Menu Screens, Screen 1

Fig. 11, Maintenance Menu Screens, Screen 2

Fig. 12, Trip Data

Fig. 13, Warning Messages

Fig. 14, Ignition Off (shown when ignition is keyed OFF)