Operation
Before driving the vehicle, secure all loose items in the vehicle so that they will not fly forward during a full brake application. Check that the brake system warning light is off after releasing the hand brake. If the warning light does not go off, correct the problem before continuing operation of the vehicle.
During normal braking stops, depress the foot brake control pedal until braking action slows down the vehicle. Increase or decrease the pressure on the pedal so that the vehicle comes to a smooth, safe stop. Apply the hand parking brake if the vehicle is to be parked.
Important: Make sure that the fluid level in the main cylinder reservoirs is at the bottom of the fill-neck. See Fig.. Use only DOT 3 brake fluid in the Bosch hydraulic pin slide brake system.
-
Open caps and check fluid level.
-
Fill to this level.