Differential Lock Switch
All axle switches contain a red LED that illuminates the switch when it is turned on (the upper part of the rocker is pressed). The legend under the LED, if any, is not visible until the switch is turned on. For more information on axle switch function, see Drive Axles With Differential Lock.
Important: A guard is positioned around all axle switches to prevent unintentional activation.
Notice: Differential lock should only be engaged when the vehicle is stopped or moving slowly at low throttle. This will prevent internal axle damage.
The optional differential lock switch is a two-position guarded rocker switch. It causes the wheels on each axle governed by the switch to rotate together. It is also known as side-to-side wheel lock. See Fig..
Fig. 1, Differential Lock Switch
To lock the wheels together, press the upper half of the rocker switch momentarily. To turn off differential lock, press the upper half of the rocker switch again.
When the panel lights are on, the double-axle icon is backlit in green.
Important: The differential lock switch is guarded to prevent unintentional switch activation. If the LED in the switch begins to blink during normal operation, when the switch has not been activated, this indicates an error condition. Take the vehicle to an authorized Freightliner dealer as soon as possible.