Brake Caliper Slide Pin Lubricating, Bosch Hydraulic Brakes

s2 m 42.12.000

Warning: Breathing brake lining dust (asbestos or non-asbestos) could cause lung cancer or lung disease. Unless exposure can be reduced below legal limits, wear an air purifying respirator approved by MSHA or NIOSH at all times when servicing the brakes, starting with removal of the wheels and continuing through assembly.

Note:  See the Bosch Pin Slide Disc Brakes Service Manual for more information.

Apply 1/8 oz (3.5 g) Aeroshell Grade 5 grease to each of the two slide pin and slide pin bore sets. See the Bosch Pin Slide Disc Brakes Service Manual for additional information.

With ZOH-T calipers, install the solid pin (no bushing) only in the anchor plate leading hole position. Install the pin with the rubber bushing and notches only in the anchor plate trailing hole position. Tighten the leading-side pin first, then tighten the trailing-side pin.

Tighten ZOH-T bolts 93 to 107 lbf·ft (126 to 145 N·m). See Fig..

  1. Flanged Bolt

  2. Leading Pin

  3. Trailing Pin

  4. Rubber Bushing

Fig. 1, ZOH-T Slide Pins and Bolts

Note:
Parent topic: Brakes
Document Number: 0000121154
Manual Publication Date: 2024-05-24
Topic Publication Date: 2024-11-13