Freightliner AirLiner Torque Arm Bushing Check

s2 m 32.01.002
  1. Without detaching the torque arms, use your hand to attempt to move each of the torque arm ends up, down, in, and out. If there is any movement, replace the torque arm.
  2. Inspect the weld seams between the torque arm tube and the shorter bushing tubes. If there are cracks, replace the torque arm. Do not weld the torque arm for any reason.
  3. Inspect the rubber bushing ends. See Fig.. Replace the torque arm for any of the following reasons.

    • There are gaps between the rubber bushing and the pin or the outer steel sleeve.

    • Either bushing end contacts a torque arm pin mounting bolt.

    • There are cracks in the bushing.

    • Part of the rubber bushing extends beyond the outside diameter of the outer bushing sleeve.

    Fig. 1, Torque Arm Bushings

Note:
Parent topic: Suspension Inspecting
Document Number: 0000121237
Manual Publication Date: 2024-05-24
Topic Publication Date: 2024-11-13