Draining
s2 m 26.02.000
Important: For oil change intervals, see the
applicable Eaton Fuller Driver Manual or Service Manual.
Eaton Fuller has a complete listing of approved lubricants for its transmissions on its internet website. Refer to the Eaton website for additional information: www.roadranger.com.
Important: Manual transmissions filled
with approved synthetic lubricants require a lubricant drain and fill,
and a magnetic plug cleaning every 500,000 miles (800 000 km), regardless
of the service or vocation of the vehicle. Manual transmissions with
petroleum-based lubricants require a lubricant drain and fill, and
a magnetic plug cleaning at each Maintenance 2 (M2) interval. All
transmissions, regardless of lubrication used, also require a check
of the transmission breather at each Maintenance 1 (M1) interval.
- Park the vehicle on a level surface. Apply the parking brakes and chock the rear tires.
- Drain the fluid while the transmission is warm.
- Clean the magnetic plug(s) before installing it. Use a piece of key stock, or any other convenient steel slug, to short the two magnetic poles and divert the magnetic field.
- Install and tighten the drain plug(s) 50 lbf·ft (68 N·m).
Note: