Engine Support Fastener Checking

s2 m 01.02.000

Note:  Front and rear engine supports for vehicles built from January 2007 require the same maintenance as shown below.

Mounts should be inspected when the engine is removed for service. Perform the following check.

  1. Check the engine support fasteners at the rear of the engine for tightness. Tighten the fasteners 241 lbf·ft (327 N·m).
  2. Check the engine support fasteners at the front of the engine for tightness. Tighten the fasteners 136 lbf·ft (184 N·m).

    Note: Whenever the engine is removed, inspect the lower and upper isolators for wear. Replace the isolators if necessary.
    Note:
    Parent topic: Engine
    Document Number: 0000121285
    Manual Publication Date: 2024-05-24
    Topic Publication Date: 2024-11-13