OperatingTests of the Bendix Automatic Drain Valve

Perform the following test after repairing or replacing the DV-2 valve, to ensure that the valve is functioning properly.

With the system charged, apply the brakes several times. Each time the brakes are applied, an exhaust of air should occur from the exhaust port of the drain valve. If no air comes out, push the wire stem located inside the exhaust port. If no air comes out after pushing the wire stem, there may be a plugged filter in the adapter which should be replaced.

If the drain valve does not function properly, repair or replace it. See Cleaning and Inspection of the Drain Valve, Air Reservoir Automatic Drain Valve, Bendix DV-2 in the Cascadia Workshop Manual.