Inspection of the Drain Tube

p3 mm 83.03.001

    Notice: The ParkSmart drain tube(s) must be kept clear of debris. Failure to do so will cause excessive water build-up in the base of the unit and may cause damage to the internal components.

  1. Remove the battery cover/step or forward side fairing, as needed, to improve access to the underside of the ParkSmart unit.

    2. Note: Remove and clean the drain tubes.

    Note: Remove and clean the drain tubes.

  2. Remove the drain tube(s) from the bottom of the unit. See Fig. for systems manufactured before July 2011, or Fig. for systems manufactured from July 2011.

    Fig. 1, Drain Tube Inspection (pre-July 2011)

    Fig. 2, Drain Tube Inspection(from July 2011)

  3. Check the drain tube(s) for debris, and clean as needed.
  4. Install the drain tube(s).
  5. Install any components that were removed for access.
Note:
Parent topic: Inspection of the ParkSmart™
Document Number: 0000116537
Manual Publication Date: 2024-05-15
Topic Publication Date: 2024-11-22