Replacement of the ParkSmart Air Filter

p3 mm 83.02.003

The ParkSmart air filter is located on the inboard side of the blower fan housing, under the cabinet, directly behind the driver's seat.

    Important: When replacing the air filter, use only a Freightliner-approved air filter.

  1. Park the vehicle on a level surface, set the parking brake, and shut down the engine. Chock the tires.
  2. Remove the sleeper HVAC access panel on the inboard side of the cabinet. See Fig.. The panel is held in place with four spring clips. Pull straight out to remove it.

    Fig. 1, Sleeper HVAC Access Panel, 60- and 72-inch Sleepers

  3. Pull the filter out of the slot. See Fig..

    1. Filter

    Fig. 2, Removing the BPHS Filter

  4. Install a new filter, making sure that it is completely seated.
  5. Install the access panel.
Note:
Parent topic: Replacement of the Air Filter
Document Number: 0000116539
Manual Publication Date: 2024-05-15
Topic Publication Date: 2024-11-22