Inspection and Cleaning of the Trailer Cab
p3 mm 54.01
- Disconnect the trailer electrical cables from the sockets at the cab.
- Inspect the cables and sockets for evidence of corrosion, and clean as necessary. If a socket is too badly corroded to clean, replace it. If corrosion has gotten into the wires and connectors inside the socket, replace the cable.
- Coat the inside of the sockets with a lithium-based dielectric grease such as Lubriplate FLP DS–ES.
- Connect the cables.
Important: If using a spray cleaner to remove corrosion,
be careful to protect any surrounding painted surfaces.
Note: