Rear Towing Hookup
- Position the front tires so that they point straight ahead and secure the steering wheel in this position.
- Disconnect the battery ground cable.
- Attach the towing device.
- Lift the vehicle and secure the safety towing chains. If additional clearance is needed, remove the bumper extension, if so equipped.
- Connect the clearance lights, taillights, and signal lights. Also connect any special towing lights required by local regulations.
Warning: Due to the many variables that exist in towing, positioning the lifting and towing device is the sole responsibility of the tow vehicle operator. The operator must be familiar with standard towing industry safety measures. Improper procedures could result in personal injury or death.
Notice: Before attempting to tow a vehicle with air suspension (and during the towing operation), ensure that the air suspension is properly aired. Air the suspension through the Schrader valve on the air dryer. Attempting to tow a vehicle with an improperly aired suspension may result in damage to the chassis and body.