Push-Button Ignition and Smart Key Warning Messages
Warning messages related to the push-button ignition and smart key fob will appear in the display screen of the instrument cluster. The following is a description of the various messages that could appear.
Check Fob
When the ignition is active and the smart key fob is not within range of the start authorization antenna, the instrument cluster will display 'Check Fob'. This alerts the driver that the smart key is not recognized by the system or is not within a 4 to 5 ft (1 to 2 m) range of the antenna.
Note: This message only appears when the vehicle is traveling at 20 mph (32 km/h) or less.
Press Brake to Start
When the ignition is active, the smart key fob is within range of the start authorization antenna, the engine is not running, the service brake pedal is not depressed, and the START/STOP ENGINE button is pressed for more than 1 second, 'Press Brake to Start' will display in the instrument cluster. This alerts the driver of the action required to start the vehicle.
The driver must release the START/STOP ENGINE button and depress the service brake pedal before pressing the START/STOP ENGINE button again to start the vehicle.
Check Battery
When the ignition is active and the smart key fob battery is between 1 to 2.15V, the instrument cluster will display 'Check Battery.' This alerts the driver that the smart key fob battery needs to be replaced.
Notice: When replacing the battery, be aware that static electricity can damage the inner circuit of the smart key fob.
Operational interference of the smart key fob can occur from the use of incorrect batteries. When replacing the battery, use only battery type CR2032. Once the battery is replaced, check the smart key fob for proper operation.
Press Button With Fob
When the ignition is active, the smart key fob is within range of the start authorization antenna, the engine is not running, the service brake pedal is depressed, and the START/STOP ENGINE button is pressed for more than 1 second, 'Press Button w/Fob' will display in the instrument cluster. This alerts the driver of the action required to start the vehicle. See 'Alternate Starting Method' for instructions.
Programming Mode Active
When the ignition is active and the keyless module is in programming mode, the instrument cluster will display 'Programming Mode Active'. This alerts the driver that the system is ready to program a new smart key fob. See 'Programming a New Smart Key Fob' for instructions.