Ignition Switch

The ignition switch has four positions: OFF, ACCESSORY, ON, and START. See Fig..

In the OFF position, the key slot is vertical. The key can be inserted and removed only in the OFF position.

The following functions are operable when the ignition switch is in the OFF position (regardless of whether the key is inserted):

• high-beam headlights

• taillights

• brake lights

• road lights

• dome lights

• clearance lights

• turn signals

• hazard warning lights

• utility and baggage lights

• spotlights

• electric horn

• clock

• refrigerator

• television

Turn the key counterclockwise to the ACCESSORY position. In addition to all the functions that are operable with the ignition switch in the OFF position, the following functions are operable when the switch is in the ACCESSORY position:

• radio/stereo system

• heater and A/C fan

• mirror defog

• windshield wipers

• beacons

• power windows

• windshield washer

• outside air temperature display

Turn the key clockwise past the OFF position to the ON position. With the switch in the ON position, the warning and indicator lamps illuminate. Wait for three seconds before starting the engine.

Turn the key clockwise past the ON position to the START position and start the engine. Do not operate the starter longer than thirty seconds, and wait at least two minutes between starting attempts to allow the starter to cool. Release the key the moment the engine starts.

Switching on the ignition and releasing the parking brake automatically activates the daytime running lights, if equipped. The daytime running lights will operate until the parking brake is applied or the headlights are turned on.