Adjustment of the Bunk Restraint

4700 d 07.05.000

On vehicles equipped with a sleeper compartment, bunk restraints should be used whenever the sleeper compartment is occupied and the vehicle is moving. Restraints are designed to lessen the chance of injury or the amount of injury resulting from accidents or sudden stops.

  1. Make sure the belt is attached to the bunk support and sleeper wall.
  2. To lengthen the belt, tip the link end downward and pull the link until it connects with the buckle.
  3. After the belt is connected, shorten it by pulling on the loose end until the belt is snug, but comfortable. Be sure the belts are not twisted. See Fig..

    • Pull on the loose end to shorten the belt.

    1. Belt

    2. Connector

    3. Release Buckle

    Fig. 1, Bunk Restraint Adjustment

Note:
Parent topic: Sleeper Compartment Restraints
Document Number: 0000118615
Manual Publication Date: 2024-05-13
Topic Publication Date: 2024-05-16