Engaging PTO
Some vehicles are equipped with a PTO mounted to a Meritor MTC transfer case. For these vehicles, engage the PTO only when the transfer case is in neutral, the transmission is in neutral/park, and the parking brake is applied. To begin using the PTO, select the drive gear based on the PTO system operator's manual.
Table 1, Operating Guidelines, Meritor MTC Transfer Cases
|
Disengaged Steer Axle |
Engaged Steer Axle |
|||
|
Range |
Traction Conditions |
Applicable Vehicle Speeds |
Traction Conditions |
Applicable Vehicle Speeds |
|
HIGH RANGE |
Most normal driving conditions (such as dry or wet pavement or mixed road surfaces) when moderate to high vehicle speeds are appropriate. |
0 mph (0 km/h) to maximum vehicle speed |
When more traction is needed at moderate to low vehicle speeds on dirt or gravel surface with shallow to moderate grades (8% maximum), icy or snow-covered roads, or hard-packed sand. |
20 mph (32 km/h) or less |
|
LO RANGE |
Not applicable. Do not use LO RANGE unless the steer axle is engaged. |
When maximum power and maximum traction is needed on steeper grades (15% maximum), deeply rutted tracks, deep mud or snow, extremely rocky surfaces, or soft, loamy sand. |
15 mph (24 km/h) or less |
|
|
IMPORTANT: Engaging the steer axle will increase the turning radius of the vehicle. |
||||