Western Star High-Back Seat

4700 d 07.02.000

See Fig. for seat adjustment controls. Not all models of the seat have all the adjustments listed below.

Note:  Not all models of the seat have all the adjustment controls shown.

  1. Rear Cushion Height Adjustment Knob

  2. Fore/Aft Isolator

  3. Front Cushion Height Adjustment Knob

  4. Bottom Cushion Extension Handle

  5. Fore/Aft Seat Slide Lever

  6. Backrest Tilt Knob

  7. Heater Button

  8. Shock Absorber Lever

  9. Height Adjustment Switch

  10. Lumbar Support Switches

Fig. 1, Western Star High-Back Seat

  1. Rear Cushion Height: To adjust the height of the rear of the seat cushion, remove your weight from the seat and turn the rear cushion adjustment knob to one of three positions.
  2. Fore/Aft Isolator: To engage the isolator, turn the isolator knob rearward to the unlocked position. Turn the isolator knob forward to the locked position when the isolator feature is not desired.
  3. Front Cushion Height: To adjust the height of the front of the cushion, remove your weight from the seat, then turn the adjustment knob toward the front of the seat (clockwise) to increase cushion height. To lower the cushion height, turn the adjustment knob toward the rear of the seat (counterclockwise).
  4. Bottom Cushion Extension: To adjust the fore-and-aft position of the seat cushion, remove your weight from the seat, then lift up and pull forward on the cushion adjustment handle. To return the cushion to the aft position, lift up and push rearward.
  5. Fore/Aft Seat Slide: To adjust the fore-and-aft position of the entire seat, move the fore-and-aft seat adjustment lever to the left and slide the seat forward or backward to the desired position. Move the lever back to its original position to lock the seat in place.
  6. Backrest Tilt: To tilt the backrest, lean forward slightly to remove pressure from the cushion, then turn the knob forward or rearward to achieve the desired position.
  7. Heater: To turn on the heat option, press the button. To turn off the heat option, press the button again.
  8. Shock Absorber: To adjust the amount of damping the shock absorber provides, move the lever up to increase damping; move the lever down to decrease damping.
  9. Height Adjustment: To raise or lower the height of the seat, use the height adjustment switch on the side of the seat.
  10. Lumbar Support: To adjust the lumbar support, use the lumbar support switches on the side of the seat.
Note:
Parent topic: Seats and Restraints
Document Number: 0000118617
Manual Publication Date: 2024-05-13
Topic Publication Date: 2024-05-16