Initial Maintenance (IM) Operations: 00–04

49X mm 00.04.001

The Initial Maintenance table lists all maintenance operations that are to be performed at the initial maintenance (IM) interval. Maintenance operation numbers are reference numbers used to help you find detailed instructions in this manual on the maintenance operations to be performed. All operations listed in the table, along with the operations listed in the applicable M1 maintenance interval table, must be performed to complete the initial maintenance (IM).

Table 1, Initial Maintenance (IM) Operations for Service Schedules I and II

Maintenance Operation Number Initial Maintenance (IM) Operations for Service Schedules I and II Check
M1 Maintenance Interval Operations: 00–05 M1 Maintenance Interval Operations: 00–05  
Frame Fastener Torque Check Frame Fastener Torque Check  
General Information General Information  
Suspension TufTrac Gen2 I-Bolt Torque Check Suspension TufTrac Gen2 I-Bolt Torque Check  
NEWAY ADZ V-Rod Torque Check NEWAY ADZ V-Rod Torque Check  
General information General information  
Operating Test Operating Test1  
Tightening the Fuel Tank Band-Nut Tightening the Fuel Tank Band-Nut  
  1. The automatic drain valve should be inspected every six months or 1500 operating hours, whichever comes first.

Table 1, Initial Maintenance (IM) Operations for Service Schedules I and II

Note:
Parent topic: General Information
Document Number: 0000117877
Manual Publication Date: 2024-05-16
Topic Publication Date: 2024-10-31