Inspection and Cleaning the External A/C Condenser

49X mm 83.03.002
The Dual HVAC System A/C condenser is located on the backwall of the sleeper. Inspect the condenser as follows.
  1. Check for debris in the condenser housing.
  2. If needed, remove the condenser cover fasteners, then remove the cover. See Fig..

    Remove the condenser cover.

    Fig. 1, Condenser Cover Fasteners (compact style condenser)

    3. Note: If the condenser core has a build-up of fine debris, an A/C core cleaner, approved for copper and aluminum cores, and a low pressure stream of water can be used to clean it.
  3. Clean out any debris in the module.
  4. Install the cover.
Note:
Parent topic:  Dual HVAC System Inspection
Document Number: 0000119474
Manual Publication Date: 2024-05-16
Topic Publication Date: 2024-10-31