Inspection of the Tie Rod

cen mm 33.02.000

Inspect the tie-rod ends as follows:

  1. Shake the cross-tube. A loose fit, or movement between the tapered shaft of the ball and the cross-tube socket members indicates that the tie-rod end assembly must be replaced.
  2. The threaded portion of the tie-rod end assembly must be inserted all the way into the cross-tube split for adequate clamping. See Fig.. Replace the components if this cannot be done. For instructions, see of the Century Class Trucks Workshop Manual.

    Note: Shown without pinch bolt to provide clarity.

    1. Cross-Tube Split

    Fig. 1, Tie-Rod End Adjustment

Note:
Parent topic: Front Axle
Document Number: 0000122149
Manual Publication Date: 2025-02-11
Topic Publication Date: 2024-06-04