Inspection of the Cab Access Stairs, Argosy COE

cen mm 60.03.000

On Argosy COEs, inspect the cab access stairs for wear, damage, or excessive dirt build-up, and verify that the step is operating properly. Inspect the bump stops, and replace if necessary. See Fig..

Check the step alignment using the door frame as a reference. Verify that the steps are parallel with the door frame, and that a constant gap is maintained. Also check the side-to-side level of the step. Adjust if necessary. Refer to of the Century Class Trucks Workshop Manual for instructions.

  1. Forward Bump Stop

  2. Flatwasher

  3. Bolt

  4. Rear Bump Stop

Fig. 1, Cab Access Stairs Assembly

Note:
Parent topic: Cab
Document Number: 0000122446
Manual Publication Date: 2025-02-11
Topic Publication Date: 2024-06-04