Lubrication of the Tie Rod, Detroit™ Axles

cen mm 33.10.000

For any Detroit axle that requires lubrication of the tie-rod ends, wipe the grease fittings clean, then pump multipurpose chassis grease, NLGI Grade 1 (6% 12-hydroxy lithium stearate grease) or NLGI Grade 2 (8% 12-hydroxy lithium stearate grease), into the tie-rod ends until all used grease is forced out and fresh grease is seen at the ball stud neck. See Fig..

Note: No grease should emit from the tie-rod boot. If grease emits from the tie-rod boot, the boot is damaged.

  1. Grease Fitting

  2. Boot

Fig. 1, Grease Fitting and Boot, Detroit Axles

Note:
Parent topic: Front Axle
Document Number: 0000122174
Manual Publication Date: 2025-02-11
Topic Publication Date: 2024-06-04